 | 1/2 or 3/4 H.P. energy efficient high
quality motor |
| 1.5 amps, 115 volt, one phase, 60/50
cycle |
| 25 foot quick change power cord
|
| Two 25 foot x 3/8 hollow braided mooring
lines with shackles |
| Dimensions of shipping box 12 5/8 x 12
5/8 x 12 3/4 |
| Weight approx. 30 pounds |
| Motor shaft is 316 stainless steel, the
best material for salt water application |
| Permanent split capacitor ensures quick
high torque and smooth operation, while producing the highest efficiency
of a single phase induction motor. Motor and capacitor are matched for
ultimate performance |
| Internal, heavy duty, hard faced
mechanical seal with stainless components immersed in dielectric
lubricating fluid. Additional double lip shaft seal for extra protection.
|
| Stator motor windings have double
impregnation of baked insulating varnish |
| Two heavy duty ball bearings provide
support for the rotor while being cooled with dielectric type oil
|
| Sacrificial custom designed zinc is
provided for conditions where electrolysis may be present |
| Propeller is custom designed for maximum
thrust and performance. Propeller screws on shaft for easy removal and
replacement |
| Twenty-five feet of 16/3 water and oil
resistant cord with three prong molded plug is standard. Additional length
cord available: 50 and 100 feet |
| Heavy duty PVC custom brackets that
attach motor to shroud. All stainless bolts and locking aircraft nuts are
used |
| Performance certified tested at our
facility for proper output and leaks before shipment |
| Best three-year limited warranty in the
marketplace |
| Comes complete, just open the box,
remove and install |
| Optional thermostat custom design turns
Ice Eater on when needed. Ideal for unattended application |
